DriveHUD - Poker HUD & Database Software [-10% Discount]

0 instances in a 10k sample is very probable. 27 in 10k, seems highly unlikely. That's why I was saying it's going to be a pretty useless stats on the whole because of the specific actions needed.

What exactly did AI locate or how did you do this?

Nice. I'm learning something new. When I make a custom stat, I usually only use 4 to 7 expressions. Ty FD.

Got it... well, if you need any help w/ a custom one, just let us know.

Hi FD,

Is it possible to develop such an expression (something like Istwotoneboard, israinbowboard) that it would count with boardcards the frequency when the 3rd river flush card hit in 2 scenarios ?

2-tone flop → turn different → river flush
rainbow flop → turn adds suit → river flush

I have tried to make a workaround but the results were not correct.
Thank you for checking it.
best regards,

I assume you mean for stats, because this exist for filters. I can ask about this for custom stats.

Just fyi, these are all the internal ones.

But you're looking for the board only w/o action correct?

yes it is for custom stats, I 've created one but it gives good and bad results 😃 so with workaround im not able to get only the correct results.
here it is :
Basically River-bet when flush completes -with such a condition :

2-tone flop → turn different → river flush
rainbow flop → turn adds suit → river flush

Count(DidRiverBet = yes and (BoardCards = "XsXsXxXhXs" or BoardCards = "XsXxXsXhXs" or BoardCards = "XxXsXsXhXs" or BoardCards = "XsXsXxXdXs" or BoardCards = "XsXxXsXdXs" or BoardCards = "XxXsXsXdXs" or BoardCards = "XsXsXxXcXs" or BoardCards = "XsXxXsXcXs" or BoardCards = "XxXsXsXcXs" or BoardCards = "XhXhXxXsXh" or BoardCards = "XhXxXhXsXh" or BoardCards = "XxXhXhXsXh" or BoardCards = "XhXhXxXdXh" or BoardCards = "XhXxXhXdXh" or BoardCards = "XxXhXhXdXh" or BoardCards = "XhXhXxXcXh" or BoardCards = "XhXxXhXcXh" or BoardCards = "XxXhXhXcXh" or BoardCards = "XdXdXxXsXd" or BoardCards = "XdXxXdXsXd" or BoardCards = "XxXdXdXsXd" or BoardCards = "XdXdXxXhXd" or BoardCards = "XdXxXdXhXd" or BoardCards = "XxXdXdXhXd" or BoardCards = "XdXdXxXcXd" or BoardCards = "XdXxXdXcXd" or BoardCards = "XxXdXdXcXd" or BoardCards = "XcXcXxXsXc" or BoardCards = "XcXxXcXsXc" or BoardCards = "XxXcXcXsXc" or BoardCards = "XcXcXxXhXc" or BoardCards = "XcXxXcXhXc" or BoardCards = "XxXcXcXhXc" or BoardCards = "XcXcXxXdXc" or BoardCards = "XcXxXcXdXc" or BoardCards = "XxXcXcXdXc") and IsMonotoneFlop != yes) / Count(CouldRiverBet = yes and (BoardCards = "XsXsXxXhXs" or BoardCards = "XsXxXsXhXs" or BoardCards = "XxXsXsXhXs" or BoardCards = "XsXsXxXdXs" or BoardCards = "XsXxXsXdXs" or BoardCards = "XxXsXsXdXs" or BoardCards = "XsXsXxXcXs" or BoardCards = "XsXxXsXcXs" or BoardCards = "XxXsXsXcXs" or BoardCards = "XhXhXxXsXh" or BoardCards = "XhXxXhXsXh" or BoardCards = "XxXhXhXsXh" or BoardCards = "XhXhXxXdXh" or BoardCards = "XhXxXhXdXh" or BoardCards = "XxXhXhXdXh" or BoardCards = "XhXhXxXcXh" or BoardCards = "XhXxXhXcXh" or BoardCards = "XxXhXhXcXh" or BoardCards = "XdXdXxXsXd" or BoardCards = "XdXxXdXsXd" or BoardCards = "XxXdXdXsXd" or BoardCards = "XdXdXxXhXd" or BoardCards = "XdXxXdXhXd" or BoardCards = "XxXdXdXhXd" or BoardCards = "XdXdXxXcXd" or BoardCards = "XdXxXdXcXd" or BoardCards = "XxXdXdXcXd" or BoardCards = "XcXcXxXsXc" or BoardCards = "XcXxXcXsXc" or BoardCards = "XxXcXcXsXc" or BoardCards = "XcXcXxXhXc" or BoardCards = "XcXxXcXhXc" or BoardCards = "XxXcXcXhXc" or BoardCards = "XcXcXxXdXc" or BoardCards = "XcXxXcXdXc" or BoardCards = "XxXcXcXdXc") and IsMonotoneFlop != yes)

Ok, got it. I submitted your request to the dev team earlier today and they said they were going to add those two terms. So it should be in an upcoming build.

Thanks again for your continued support.

Thanx a lot, I appreciate it.

Is there a way for the HUD to only include non-HU villain hands when playing both HU and non-HU?
I have set the number of players form 3 to 10 but I still notice the total hands go up for villain when playing HU.

Yes, of course. np.

If you set a player filter then that should work. Are you sure the filter you set was for the HUD you're using on table? If so, then send a log from the support icon in dh2 and check the option to send an advanced log so we can check your HUD setup.

Just to confirm, you only want these two correct:
Istwotoneboard, israinbowboard

I know you do a lot of custom DH2 HUDs so if there's something else you'd want, now is the time. 😀

Yes, those two stats would definitely be useful to include.

As for updates, there have been several requests for grid-based HUDs, especially for heads-up or short deck formats. While a workaround exists by creating multiple panels, it would be much simpler if this were supported as a built-in option.

2.Another requested improvement is the ability to close popups with a click.

3. There was also an issue identified in 3-bet pots during heads-up play related to donk bets. This has already been discussed with Brian and is expected to be fixed in the next build.
Lastly, for bumper stickers, it would be helpful to have the option to define them based on occurrences rather than the number of hands.

Any of these improvements being implemented would be a nice addition.
Thanks a lot 😀
best regards

Thanks for the suggestions.

We already have in the dev pipeline 1 &2. Yes, 3 was fixed. And bumper stickers, I can put that suggestion in for sure. ty.

One more thing: when a popup is attached to the main HUD the sample size isn’t displayed. It would be much better if both were populated - the smaller popup showing the sample size as well as the nested popup.
(The only workaround is to include the same main stat inside the popup, but many players don’t want that.)

Another useful improvement would be the option to show the sample size on hover within popups. For more complex popups, including the sample size directly makes them quite large.
At the moment, the workaround is to create smaller popups, but that becomes very time-consuming when dealing with large numbers of stats (e.g., 1, 000+).

these 2 would be definitely needed if possible 😀

Thanks again 😀

Yeah... there are some reasons why that is though. But I can talk w/ the dev team about it. Ty for the suggestions.

Hey FD. Is there a way to clear reset/clear the HUD notes in player x-ray?

I'm not sure how other people do it or if there's a faster way, but I just backup my database, clean uninstall DH2, reinstall DH2, and then restore from the backup file.

DriveHUD 2 Beta Update - v2.0.17.13546

Improved CoinPoker support

https://drivehud.com/poker-hud/DriveHUD2...

Thanks for the patch. I tried opening and closing several tables, and HUD pop-up w/o any issue. It is working great. 😃

Awesome, ty for the feedback.

DriveHUD 2 Beta Update 2.0.17.13548

Fixed minor issues in CoinPoker support

https://drivehud.com/poker-hud/DriveHUD2...

Thanks apro.
I kinda have a large database, I'll keep the notes for now 😀

Maybe I'm misunderstanding, but it will backup notes, huds, everything as well.